The Kendama Forum

Forum categories => Gear => Topic started by: Unichuck1 on 25 September, 2017, 11:43:16

Title: String tool
Post by: Unichuck1 on 25 September, 2017, 11:43:16
When I got my krom the other day I noticed there was a small red bit of plastic like string in the box I'm guessing this is the string tool can anyone tell me the point I can't see how it works and what's wrong with just putting the string through the hole like normal ...(https://uploads.tapatalk-cdn.com/20170925/a87e440c54f38ce59193161e5bb901ff.jpg)

Sent from my SM-A310F using Tapatalk

Title: Re: String tool
Post by: johndmc on 25 September, 2017, 12:42:32
Yeah sometimes you won't always need it. Depending on the string thickness and holes drilled. If you want to change tama it can help once the string starts freying. Also the hole in the sarado can be tricky if the hole isn't drilled smoothly.

Sent from my F3111 using Tapatalk

Title: Re: String tool
Post by: johndmc on 25 September, 2017, 12:44:29
To use it, just thread it through the weave of the string at the end

Sent from my F3111 using Tapatalk

Title: Re: String tool
Post by: Aura Kendama on 28 September, 2017, 23:23:07
We find this very useful for threading stings
as John said - sometimes its not necessary as the string can go clean through
but there are times when that threader will be very useful to get the string nicely into place

we sometimes string 100 tamas and rely on that threader
;D