Outlink 2016 - Come and join

[shalafi]

@cello_91 the third isolation is in the limit, but the second is too loose (you should throw a bit later) so, rejected!

Because I know you can do better

wait... third??
were else are "isolations" ? :O

ok thanks   

The idea is that each antispin produces an isolation on the ken position (while rotating). The third one is different, it is an isolation on the whole Kendama

Actually your first one is quite good :-D


The wrong one is the one after the second swirl

[fiddletriks]

Here's mine! Always up for multiple tries so feedback welcomed haha never done isolations before but this is what Outlink is all about, trying new things and thinking outside the box haha

[cello_91]

take 2 ! 

 

[shalafi]

@nemo Accepted!
@cello_91 while you still throw the tama too early on the second antispin, this time the ken is more static. Accepted

@cello_91 However, I recommend you to try again, just for fun, letting the ken spin and rise up to the height of your wrist before doing the antispin, it will look much more smooth. Again, the first antispin looks really good.

[oesterzilla]

what about the keyword? is it not necessary to mention it in the video?
 

[shalafi]

what about the keyword? is it not necessary to mention it in the video?
 

You're right, I should have been really sleepy.

@cello_91 rejected!

He does say it

[BKA]

Errr.... He says it.

[cello_91]

Errr.... He says it.

errrrr... yes??

sorry if my pronunciation is bad.. i am german after all 

[shalafi]

Mmm, OK. He says it very fast and in low voice.

Apologies @cello_91 apparently I was ever sleepier than I thought.

@BKA thanks

Edited the posts, is accepted.

Still think you should try tossing the tama later, to see how it feels

[cello_91]

@shalafi thanks!
i will try that.. can i post it here, or wirte you so that you can tell me how it was..
because i don't understand it 100% 

[oesterzilla]

my go:

[shalafi]

@oesterzilla the angle is not letting me see properly if the last isolation is correct or not, please film it with your shoulders parallel to the camera. I "think" you do pull the tama on that one, so rejected.

[oesterzilla]

@shalafi by pulling the tama you mean the last step, right? (airplane in)
should we use the swinging motion of the ken to get it in?
thanks for the quick response, i'll give it another more tries

[shalafi]

I mean that switching from ken grip to tama grip, there must be not pulling. Ken and tama should be horizonal and remain in that same position for the grip change. The last aeroplane can do pulling.

[jakub.zahumensky]

right, how's this?